Housed in a rugged, compact belt pack, this single channel remote station offers high speech intelligibility. Visual call signaling attracts operator's attention. Remote microphone kill helps eliminate the annoyance of unused microphones being left on.

RS-601 is a single channel wired beltpack with a 4-pin male headset connector and 3-pin female/male loop thoguh intercom line connectors. The beltpack has a 2.5mm AUX headset connector and an RS-232 data connector for programming.

The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.

Technical Specifications

General
Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and short-circuit protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB

Microphone Pre-Amplifier
Headset Mic Impedance: 200 Ω
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for intelligibility

Headphone Amplifier
Load Impedance: 50 - 2,000 Ω
Output Level: +17 dBv before clipping
Distortion: Gain, line to output: +34 dB
Frequency Response: 100 Hz - 18 kHz, ±2dB

Connectors
Intercom Line: (2) 3-pin XLR–M–F
Headset: 4-pin XLR–M

Power Requirements
26mA quiescent
30mA average talk
50mA talk with signaling
DC Voltage Range: 12-32 volts

Environmental
0˚C - 70˚C (32˚F - 158˚F)
0 - 90% relative humidity

Dimensions
4.58 in. H x 3.73 in. W x 1.34 in. D
(116 x 95 x 34 mm)

Weight
7.3 oz. (0.20 kg)