The KN6 is a stainless steel, self-powered, 2-way full range speaker system. It is compact and powerful with five individual D class amplifier channels dedicated to each of its five transducer elements. it has a wide 130° vertical coverage pattern and the ability to select the horizontal coverage from 10° to 130°, making it useable as both a point source and as a line array element. It is ideal for medium throw applications in theatres, concert halls, houses of workship and AV installations. The KN6 uses two 6” Neodymium cone speakers with 2.5” voice coils for low-mid frequencies. The mid-high frequency section employs three 1” voice coil Neodymium compression drivers. The transducers are optimized with on-board DSP pre-sets. The KN6 is designed to easily integrate with KN10s self-powered subwoofer. All KN6 components are designed by the K-array R&D department and custom made under the K-array quality control system.

Acoustics
Speakers Power handling 2x250 + 3x20 w(AES)
Max power 2x500 + 3x40 w
Impedance 2x4Ω + 3x16Ω
Frequency range 45Hz - 19 KHz +/- 3dB (preset dependent)
SPL 1W/1mt 96 dB (low) 104 dB (high)
Maximum SPL 125 dB continuous - 131 dB peak

Coverage
(in horizontal position)
Horizontal 130°
Vertical selectable from 10° to 130°

Crossover
Type DSP controlled
Frequency 1.8 KHz minimum (preset dependent)

Transducers
Low - Mid frequency 2 x 6” Neodymium speakers with 2.5” voice coil
High frequency 3 x 0.5” Neodymium compression driver with 1” voice coil

Audio Input
Connectors male + female parallel 3-pin balanced XLR
Wiring PIN1= ground PIN2 = hot (+) PIN3 = cold (-)

Power Input
Connectors 2 x 3-pin PowerCon IN/OUT

Amplifiers
Type
2 x 350W @4Ω class D amplifier channel - DSP controlled
+ 2 x 20W class A/B amplifier channel
Power (woofer) 350 + 350 Watt @ 4Ω
Power (driver) 3 x 70 Watt @ 4Ω

Protection: Dynamic limiter, over current, over temp, short circuits

AC power
Operating range 85 - 270 VAC 50/60Hz autorange
P. nom 140 VA

Power Factory
(1/2 max out/8Ω) 0.97
Minimum operation voltage 70 VAC
Maximum operation voltage 265 VAC
Max continuous and burst current: 140VA(>10 sec) - 700VA (<1 sec) autorange

Physical
Dimensions 17.5 x 51 x 19 cm (6.89”x 20.08”x 7.48”)
Weight 11.4 Kg (25.13 lbs)