The KN10s is a high performance self-powered sub-bass speaker designed for use with the K-array KN6 and other small to medium format speaker systems in both touring and installation applications. The compact and strong stainless steel chassis contains two 250 watt 10” transducers with Neodymium magnet structures and suspensions engineered for maximum linear excursion, each powered by a dedicated D class amplifier. Large area porting eliminates turbulent air noise. The KN10s is ideal for medium throw applications in theaters, concert halls and AV installations. All KN10s components are designed by the K-array R&D department and custom made under K-array quality control systems.

Acoustics
Speakers Power handling 2 x 250 w(AES)
Maximum amplifier power 2 x 500 w
Impedance 2 x 4 Ω
Frequency range 30Hz - 150 Hz +/- 3dB
SPL 1W/1mt 95 dB
Maximum SPL 124dB continuous - 130 dB peak

Coverage
Horizontal Omni
Vertical Omni

Crossover
Type DSP controlled
Frequency 100 Hz minimum (preset dependent)

Transducers
Low frequency 2 x 10” Neodymium speakers with 2” voice coil

Audio Input
Connectors male + female parallel 3-pin balanced XLR
Wiring PIN1= ground PIN2 = hot PIN3 = cold

Power Input
Connector 2 x 3-pin PowerCon IN/OUT
Amplifiers
Type 2 x 350W @4Ω class D amplifier channel - DSP controlled
Power (woofer) 350 + 350 Watt
Protection Dynamic limiter, over current, over temp, short circuits

AC power
Operating range 85 - 270 Vac 50/60Hz autorange
P. nom 140 VA
Power Factory
(1/2 max out/8Ω) 0.97
Minimum operation voltage 70 VAC
Maximum operation voltage 265 VAC
Max continuous and burst current140VA(>10 sec) - 700VA (<1 sec) autorange

Physical
Dimensions 51.1 x 28 x 28 cm (19.88”x 13.19”x 33.6”)
Weight 18.8 Kg (41.45 lbs)