Clear-Com Encore RS-702 Beltpack

The RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio.

The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Technical Specifications:

Microphone Pre-Amplifier
Mic to Line (without limiter acting) Frequency Response: 280 – 15k Hz ± 3dB
Microphone output to line – Audio Level (-50dBm Electret input): -9dBm
Microphone output to line – Distortion: Microphone output to line – Signal to Noise: >65dB
Clear-Com Sound: Yes

Headphone Amplifier
Frequency Response – Line to Headphone: 150 – 20k Hz ± 3dB
Headphone input from line – Audio Level (-9dBm Electret input): 7dBm
Headphone input from line – Distortion: Headphone input from line – Signal to Noise: >50dB
Earphone to Mic – Crosstalk: >80dB
Sidetone – Adjustment Range (-80db mic input): >45dB

Keypad Indicators
Power: Green LED
Talk A: Green LED
Call A: Orange LED
Talk B: Green LED
Call B: Orange LED

Connectors
Intercom Line: (2) 6-pin XLR–M–F Ch. 1 2-Wire Intercom Channel Pin 1: Common; Pin 2: PL Power (+28VDC); Pin 3: PL Ch-B; Pin 4: PL Ch-A; Pin 5: Program Audio; Pin 6: Program Audio
Headset: 4-pin XLR–M Headset Connector Pin 1: Mic - (Mic Common); Pin 2: Mic +; Pin 3: Spkr-; Pin 4: Spkr+ (&0.5*VCCDC Supply between Pin 4 & Pin 1)
Program Audio Input: XLR-6, pins 5 & 6

Power Requirements
Voltage input range: 12 MIN - 30 MAX VDC
Current (all inputs off): ~13mA MAX
Call Voltages – Call Voltage: 16.5V dc
Call Voltages – Min Call Voltage needed: 3.3V

Environmental
Operating Temp
Range: 32°F - 158°F
Storage Temp Range: 32°F - 158°F
Relative Humidity: 0 - 90% non condensing

Dimensions
3.4in H x 4.5in W x 1.7in D

Weight
0.68 lbs