null
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station
  • Clear-Com HMS-4X HelixNet Main Station

Clear-Com HMS-4X HelixNet Main Station

SKU:
CCHMS-4X
$4,350.00

Brand:

Availability:
Special order. Ships in about 2 weeks.
Shipping:
Calculated at Checkout

HMS-4X Main Station Highlights:

  • Four independent intercom channels and power for Beltpacks transmitted over a shielded twisted-pair (mic cable or CAT-5 cable).
  • No rewiring required for communicating on more than one partyline channel or for adding or changing channel assignment.
  • Single cable operation to deliver cost savings, cable reductions, and time savings during setup and configuration. Fewer cables means touring crews have more space and less weight to transport.
  • No hum or electro-magnetic interference thanks to an all-digital system architecture.
  • Works with existing partyline products and cables.
  • Clear-Com Sound: Legendary contoured audio frequency response for maximum intelligibility and exceptional sound quality.
  • Plug-and-go system with hardware auto-discovery allows any connected beltpack or user device to be immediately recognized.
  • Seamless connectivity to existing analog intercom systems and audio devices using optional 2-wire and 4-wire interface modules.
  • Easy-to-navigate menu provides quick access to system settings and configuration, for fast and painless set up.
  • High-resolution, large format OLED displays provide up to 10 characters of user-defined labels.

Front Panel

  • Remote Microphone Kill
  • Stage Announce Out
  • Line Status Indication
  • Large format OLED displays
  • Up to 10 Characters of User-defined Labels
  • Talk and Call Keys
  • Speaker and Program Level Controls
  • Rotary Channel Level Controls
  • USB-A and Micro USB Ports
  • Headset Jack Connector
  • Microphone and Headset On/Off key

Back Panel

  • Universal Power Jack
  • GPIO- DB-25 (4 Relays & 4 Opto Inputs)
  • Hot Microphone Output
  • Announce Out
  • Program Input
  • XLR-3M Powerline Intercom Outputs
  • Ethernet Module
  • Built-in Expansion Bays for Optional Interface Modules  

dBu is an absolute measurement. 0 dBu is referenced to 0.775 volts RMS.

Connectors
Intercom Line: (4) 3-pin XLR–M
Headset: 4-pin XLR–M
USB: Type A & Micro AB
Program: 3-pin XLR–F
SA (Stage Announce): 3-pin XLR–M
Hot Mic / IFB Interface: 1/4 in. (0.64 cm) phone jack
GPI: 25 way D-type female

Microphone Pre-amplifier
Headset Mic Impedance: 200 Ω (Dynamic)
Headset Mic Voltage 1.7V (Electret selectable)
Limiter Range: 20dB
Mic Gain: 58dB (selectable)
Frequency Response: 200Hz – 12kHz contoured for intelligibility
Distortion:Noise:

Headphone Amplifier
Load Impedance: 32 - 2,000 Ω
Output Level: +12dBu before clipping
Max Gain: 12dB
Frequency Response: 100Hz - 20kHz ±2dB
Distortion: Noise: Headphone Limiter: -12dBu (selectable)
Sidetone: -18dBu (selectable)

Loudspeaker Amplifier
Load Impedance: 4 Ω
Output Level: +18dBu before clipping
Max Gain: 18dB
Frequency Response: 200Hz - 20kHz ±2dB
Distortion:Noise:

Program Line Input & 4-wire Option Module Inputs
Maximum Level Before Clipping: 18dBu
Nominal Input Level: 0dBu (selectable)
Input Impedance: >= 10KΩ
Frequency Response: 20Hz - 20kHz ±2dB
Distortion:Noise:

Stage Announcer Output & 4-wire Option Module Outputs
Maximum Level Before Clipping: 18dBu
Nominal Output Level: 0dBu(selectable)
Output Impedance: Frequency Response: 200Hz - 12kHz ±2dB
Distortion:Noise:

Hot Mic Output
Maximum Level Before Clipping: 12dBu
Nominal Output Level: 0dBu (selectable)
Output Impedance: Frequency Response: 200Hz - 12kHz ±2dB
Distortion:Noise:

Partyline
Maximum Level Before Clipping: 10dBu
Nominal Input Level: -18dBu (selectable)
Input Impedance: >= 10KΩ bridging
Frequency Response: 200Hz - 20kHz ±2dB
Distortion: Noise: Auto-nulling and Echo Cancellation
RTS/Clear-Com Selectable
Termination: External
Power: 30V max external

Main Power
Input Voltage Range: 100 - 240VAC
Input Frequency Range: 50 - 60Hz
Input Power: Output Voltage: +/-29VDC ± 1V
Output Current per Channel: 1.5A (Continuous)

Environmental
0˚C - 50˚C (32˚F - 158˚F)
0 - 90% relative humidity

Dimensions
19in W x 1.75in H x 13in D

2 year manufacturer's.