Eleven outlets in total: one unswitched and nine switched on the back, one unswitched on the front. Circuit breaker on the front of the chassis. Base level spike and noise suppression. 20 amp capacity. Fifteen foot power cord.
Power and Convenience:
For higher current applications, the JG11.0-20A has a amp circuit breaker, switch, wiring and power cord – all the features required for heavier commercial and industrial applications. Note: The NEMA 5-20P plug connects only to a 20 amp rated receptacle.
This very economical package has 11 AC receptacles with one unswitched on each the front and back. In addition to a 20 amp capacity the JG 11-20A has a front mounted circuit breaker and a 15 foot long power cord to use in difficult to reach applications.
ETL certified (File 3176209DEN-002 UL Standard 60950-1)
JG SERIES (for basic requirements):
The JG Series family of power and light modules includes six high quality, economical models that are valuable accessories for any rack-mounted system. The switched outlets on the back of each unit provide power while the discreet components inside provide a basic level of protection to help clean up dirty and dangerous AC voltage.
The Basic power conditioning includes a fast-acting metal oxide varistor (MOV) installed to clamp voltage spikes running between the incoming line and neutral leads. This level of conditioning also includes a capacitor to reduce the level of AC line interference that may be transmitted between the line and neutral leads.
INPUT VOLTAGE: 120vac, 60 Hz
TECHNICAL CURRENT CAPACITY: 16 Amps (80% of circuit breaker rating)
CURRENT OVERLOAD PROTECTION: Circuit Breaker, 20 Amp, Thermal on Front
DIMENSIONS: 1.75" H x 19" W x 7" D
WEIGHT: 5.5 lbs
POWER CORD: 14.75 Foot 12/3 SJT with NEMA 5-20 Plug
POWER OUTPUT RECEPTACLES: Eleven NEMA 5-15, 15 Amp Rating Each
AC LINE FILTRATION: Line Capacitor (Line & Neutral)
VOLTAGE SPIKE PROTECTION: Metal Oxide Varistor (Line & Neutral)