null
  • Doug Fleenor Design Preset 10 Architectural Console
  • Doug Fleenor Design Preset 10 Architectural Console
  • Doug Fleenor Design Preset 10 Architectural Console
  • Doug Fleenor Design Preset 10 Architectural Console

Doug Fleenor Design Preset 10 Architectural Console

SKU:
DFPRE10-A
$648.00 $601.71
(You save $46.29)

Brand:

Availability:
Special order. Usually ships in 10-14 business days.
Shipping:
Calculated at Checkout

The Preset 10 Architectural [PRE10A] is a lighting control station capable of storing up to ten presets. Presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons.

The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the PRE10A are power (2 wires), and DMX512 (3 wires). Power may be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.

Each PRE10A can work in conjunction with a lighting console, automatically switching between preset and console control. When the console generates DMX, the PRE10A goes off-line, and the console operates normally. Upon loss of DMX from the console, the PRE10A either returns to its previous preset or holds the last look (jumper selectable).

There are two versions of software available: PRE10A and PRE10A-POPO. The original PRE10A offers "Radio Button" operation, where only one preset may be active at time. The new PRE10A-POPO offers ten HTP presets. Each of these ten HTP presets are capable of being turned ON or OFF individually.

Technical Specifications:

  • Connectors:
    Phoenix Contact MSTB series 5 position two part terminal block
    Model: MSTB 2,5/5-ST-5,08 Order Number 17 57 04 8
  • Connector pin out:
    1 - DMX512 common
    2 - DMX512 data -
    3 - DMX512 data +
    4 - Negative supply
    5 - Positive supply
  • Input/Output Circuit: ESD protected EIA-485 transceiver (LT1785)
  • Indicators: Ten green preset indicator LEDs
    One red Lockout / Record LED
  • User controls: Ten preset push buttons
    One recessed record push button
    One recessed fade time push button
  • Option Jumpers: Master / Slave mode selection
    Pervious preset / Hold last look mode selection
  • Power input: 9 to 16 volts AC or DC / 150 mA per station
    (A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)
  • Color: Black anodized with silver engraved nomenclature
  • Size: Face Plate: 4.5"h x 2.75"w x 0.2"d
    Face Plate Rear Inset: 4.05"h x 2.4"w x 0.1"d
    Electrical Box Minimum Inside Dimensions: 3.5"h x 2.1"w x 1.25"d