The ENTTEC DMXEtherGate MK2 is the evolution of the DMXetherGate. This new DMXEthergate has 2 output or input ports, supports multiple protocols and is configured using any web browser thank to the built-in webpage.
All you need is an "IN" box at the Console, 1 (or more) "OUT" at the Fixture end and an Ethernet network in between.
Operation (Plug &Play mode)
The DMXEtherGate IN receives DMX512 from the lighting controller, the high speed engine processes the DMX for transmission over ethernet. The packet is then sent using a UDP/IP scheme with a broadcast IP and MAC address. Every node on the same network will receive that packet. The output node will then un pack the DMX data and update it's internal buffers.
Like most of our products, the DMXEtherGate hardware fits into a robust metal 9.5 inch 1 Unit rack, 2 Can be mounted side by side to form a standard 19 inch rack, The DMXEtherGate has 4 connectors: DMX512 IN or OUT depending on the model, Ethercon RJ45 and IEC power connector. The DMXEtherGate has an internal mains power supply that will accept any input voltage from 96 to 264V AC
Both nodes are CE and FCC approved.
FREE SHIPPING IN CONTINENTAL USA ONLY. PLEASE CALL FOR SHIPPING QUOTE.
One year limited liability warranty.