The Braq Cube™ 4C packs an unprecedented 100 watts of output into just a 5 inch cube! Despite its surprisingly small size, the Braq pushes out more than enough light to replace conventional wash lights on stage, film sets or commercial architecture.
Sharing the same best in class RGBW quad-chip emitters used in Braq’s smaller sibling the Miro Cube™, a gorgeous palette of saturated, mid-tone and pale tint colors can be dialed in at the touch of a button. And of course, a true white is always available as well, not the unflattering mixed amber compromise found in other lights. The single chip optic eliminates multi-colored shadows and creates a powerful, fully blended color wash wherever the designer needs it.
Smart programming in the Braq Cube 4C includes a stand-alone color wash mode and allows multiple units to be easily slaved together, synchronized and off-set using self-generated DMX for color chases and other dynamic lighting patterns without a console. Use it alone, configured in strips & arrays or build it directly into the set or architecture for virtually any application needing colored light, including: stage productions, broadcast studios, bars & casinos, retail stores and up-scale lobbies.
Using 21 high-quality Cree XML 4W emitters, the Braq Cube WNC designed by The Black Tank outputs more than 7000 lumens and can adjust from 2700K to 6500K. A unique mix of warm, neutral and cool LEDs insure excellent rendering across all color temperatures. Small enough to be built into scenery or soffits, and lightweight enough to mount as a track light, the Braq Cube WNC is perfect for use in broadcast & photography studios and film & TV sets, as well as retail stores, museums and other architectural installations that require a bright, gorgeous white light with excellent color rendering.
Product Features:
- Unique patented heat management system packs the most lumens into the smallest form factor
- No expensive power supply or ballasts needed - plug directly into mains power 90-240 VAC
- Neutrik Powercon connector and pass-thru for easy daisy-chain configuration
- Over 20 luminaires can be powered on a single 20A circuit
- Power Cord configurations include:
- 8-ft AWG16 cord with Neutrik Powercon and 3-prong Edison ends
- No cord
- Optional Power Cord Accessories include:
- 8-ft AWG16 cord with Neutrik Powercon and 3-prong Edison ends, in-line switch
- 8-ft AWG16 cord with Neutrik Male/Female ends (Powercon Pass-Thru)
- Flicker-free dimming in 8- or 16-bit resolution
- Intuitive full text LCD panel for manual operation
- Easily installed on standard line-voltage lighting track with optional yoke assembly, including full DMX track options
- Full assortment of spot, medium and wide lenses included
- Novel “filament mode” mimics the delayed blackout glow of incandescent fixtures
- Modular design easily configures in strips and arrays for maximum versatility
Technical Specifications:
- LED: 7 x 12W Osram Ostar multi-chip or 21 x 4W Cree XM-L LEDs
- Output: 1800 Lumens (4C, no lens) or 7100 Lumens (WNC, no lens)
- Lumen Maintenance: 80,000 hours B10 L70 at 25°C (LM79-08 Standard) (4C) or 100,000 hours L50 at 25°C and 50,000 hours L50 at 45°C (WNC)
- Color Range (4C): 4.2 billion discrete mixes (255 x 255 x 255 x 254)
Color Temperature (WNC): 2700K - 6500K - Operation: DMX: 8 or 16 bit DMX512
Manual: Full Text LCD interface sets color output - Input Voltage: 90 – 240 VAC 50/60Hz
- Power Input: Neutrik Powercon input and pass-thru
- Data: 5-pin XLR Male, 5-pin XLR female - DMX
- Power Consumption: 100 Watt at maximum output
- Operating Temp: -13° to 113° F (-20° to 45° C)
- Humidity: 0 – 95% non-condensing
- Dimensions: 5in x 5in x 5.3in
- Weight: 3.5 lbs
- Housing: Powder coated aluminum extrusion (1/8 in wall)
- Approvals: FCC Class A Radiated and Conducted
ETL / UL Standards 1573 and 8750
cETL / CSA C22.2#166-M1983
CE
IP20 Rated
Rosco Laboratories warrants for Three Years that Braq Cube products meet the applicable specifications from the time Rosco or Authorized Dealer ships the product.