• Aqua-Resin Aqua-Veil

Aqua-Resin Aqua-Veil



Call (206)-622-7850, Option 1, for up-to-date availability and lead times.
Calculated at Checkout

Aqua-Veil surfacing veil is an easy to use, safe and minimally irritating, continuous or long strand, fiberglass mat material with multiple uses in Aqua-Resin laminating, and foam-coating applications.

Aqua-Veil can be used to both strengthen and unify a thinly applied gel/surface coat on a mold surface, and in doing so prevent cracking or premature release of the gel coat from the mold surface. In addition it can be post-applied to already cured, or curing part surfaces to provide a smoother surface for sanding and other finishing operations.

Two primary uses for Aqua-Veil are Foam-Coating and gel/surface coats. Because of its specially formulated, soluble binder, the individual glass filaments easily separate when brush applied into a wet Aqua-Resin mix, allowing the Aqua-Veil to fully assume the three-dimensional contour of the surface to which it is applied.

Aqua-Veil is available in three nominal thicknesses: 10 mil, 30 mil and 50 mil. The 10 mil is particularly low-irritating and is recommended for individuals with sensitive skin.