• Look Solutions Cryo-Fog Low Fog Machine

Look Solutions Cryo-Fog Low Fog Machine



Special order. Usually ships in 1-3 business days.
Calculated at Checkout

The Cryo-Fog is a powerful 2200 Watt low fog machine. The Cryo-Fog is a fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid.

Liquid CO2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO2 is delivered from a low pressure tank (20 - 24 bar), which is connected to the machine via a hose.

The intelligent technology ensures sure that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.

The Cryo-Fog benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.


  • DMX 512 as standard
    The Cryo-Fog can be controlled via DMX 512. The machine uses three channels on the desk. So, the pump, the fan and also the CO2-valve can be adjusted separately.
    If the Cryo-Fog is controlled via DMX, the machine can also be used as a "normal" fog generator. The DMX start address can be adjusted and saved via the control panel.
    The machine can also be controlled with analogue (0 - 10 V) via a lighting desk or via XLR-remote (option). The fogging process starts automatically as soon as the cooling chamber has reached the right temperature.
    A stand-alone-mode is also possible. The adjustment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling chamber has reached the right temperature. Therefore to keep the start button pressed permanently is unnecessary.
  • Control panel
    The control panel with LED-display has simple symbols to allow for easy operation. It also protects the control buttons against dirt.
  • Fine adjustments of the output
    Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Cryo-Fog to be used in both small and large locations.

Technical Specifications:

Procedure: vaporizing fog generator with cooling system
Power requirement: 2200 Watt
Voltage: 230V/50Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output: 100 ml/min.
Fluid consumption at 50% output: 40 ml/min.
Liquid CO2 consumption at max. output: 2 kg/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Fogging time: continuous output
Control: DMX 512
0 - 10 V analog
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions: 26.4" L x 20" W x 12" H / 67 x 51 x 30 cm
Weight without bottle: 62 lbs / 28 kg