• Look Solutions Viper S Fog Machine

Look Solutions Viper S Fog Machine

$990.00 $890.00
(You save $100.00)


Special order. Usually ships in 1-3 business days.
Calculated at Checkout

This fog generator with 650 W and an powerful output of approx. 8 meter perfectly completes the Viper range.

The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses.

The Viper S is characterised by a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output.

Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternatve to bigger machines.


  • Finest adjustments of the output
    Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This allows an individual adaptation to the dimensions of the room.
  • DMX 512 as standard
    The Viper S can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.

    The DMX start address can be adjusted and saved via the control panel.
    If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine.

    The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLRplugs.

    A stand-alone-mode is also possible. The adjustments are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted pump level.

    A radio remote is also available as an option.
  • Internal timer
    With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
  • Control panel
    The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.


The following Look-fog fluids are available for the Viper S:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Technical Specifications:

Procedure Vaporizing fog generator
Power requirement 650 Watt
Voltage 230V / 50 Hz or 120V / 60 Hz
Heat-up time approx. 7 min.
Fog output adjustable in 99 steps
Fluid tank capacity 750 ml (25.3 oz)
Fluid consumption 60 ml/min. at max. output (2 oz)
15 ml/min at cont. output (0.5 oz)
Output projection approx. 26.2 ft / 8 m
Fog time at 100%
at < 50% output
approx. 35 seconds
continuous output
Temperature control Microprocessor controlled
Overheating protection Heater block with thermostat
Pump with temperature switch
Control DMX 512
0 – 10 V analog
Stand alone
Internal timer
Radio remote (option)
Dimensions (L x W x H)
without tank housing
13.7" x 7.1" x 7.5"
35 x 18 x 19 cm
Weight 11.9 lbs. / 5.4 kg

Made in Germany.