Rosco Pica Portal PD125

Simplified Power + Data Distribution for Pica Cubes™

The Pica Portal empowers electricians and contractors to provide power and data to remotely located Pica Cubes for clean and simple installations in architectural, museum, and entertainment applications. Capable of powering and controlling up to four Pica Cubes, the Pica Portal utilizes Power Over Ethernet (P.O.E.) technology to deliver both low-voltage power and DMX signal to a Pica Cube located up to 240' away from the Portal.

To connect Pica Cubes to the Pica Portal, simply plug the Pica Portal into AC power and then connect it to a DMX control source using a 5-pin DMX cable. From there, connect up to four Pica Cubes to the output ports on the Pica Portal using standard CAT5 Ethernet cables.

The Pica Portal is convection cooled, has built in electrical safety features and features integral mounting points for ease of installation.

Product Features:

• Delivers Power + Data to Pica Cubes via common Cat5 cable
• Supports up to (4) Pica Cubes
• 100-240VAC In / 12VDC Out
• DMX512 protocol

Technical Specifications:

• Input Voltage: 90 - 240 VAC 50/60Hz
• Output Voltage: 24VDC
• Power Consumption: 125 Watt at maximum output
• Power Input: IEC Power Cable
• Connectors: DMX 5-pin XLR male & female/ 4x RJ45
• Max. Cable Run: Up to 240’/73m each from the portal
• Operating Temp.: -13° to 113° F
• Humidity: 0 - 95% non-condensing
• Dimensions: 7.25in x 5in x 2.22in
• Weight: 1.5 lbs
• Housing: Surface Mount ABS Plastic Enclosure
• Approvals:
  • FCC Class A Radiated and Conducted
  • ETL / UL Standards 1573 and 8750 / CE